Once the Backlight Of The LCD Tv screen Has Failed.

Select the battery-release latch and press down onto it with one hand, and then pull the battery from the case, setting the notebook computer battery aside.
The convenience provided by the portability of a notebook computer can
become a hindrance because of the screen malfunctions? it seriously isn't easy to
connect a new monitor as possible with a desktop model. If the backlight
from the LCD screen has was unsuccessful, you can see almost any image. To fix all the
problem, the entire inverter board will be connected LCD cable requires
to be manually substituted. Here below are the instruction on your
reference.
1. Check in your manual of your computer or search the infomation as a result of
the Internet to support the a part of the manufacturer抯 websites. Simply
get that what type fo inverter board you'll need for your computer, consider
my Pavilion DV2000 Panel as instance, I buy a right one from a good site, HooToo. com, after which i fix it on my own.
2. Turn off this laptop抯 operation system. Turn off the LCD screen
lid. CTurn the whole laptop over so your bottom end of the result is facing
up on to you. Locate the battery-release latch and press down onto it
with one hand, and then pull the battery from the case, setting the notebook computer battery aside.
3. Locate the rubber pieces at the edges and top of the LCD. Pop the
stopper pieces off of the case by inserting a designated object underneath
them after which pulling out toward people. Use a screwdriver to withdraw the
screws hidden underneath the stoppers.
4. Put the laptop back over and receptive the LCD screen back off.
Slide a flat in addition to thin object, such to be a screwdriver, directly
underneath the seam of this plastic bezel underneath any LCD screen.
Wiggle the screwdriver down and up gently until the bezel pops journey
case. Lift the bezel up and determine if there is a good cable running to
the actual motherboard. Disconnect the cable when there is one.
5. Pull the situation on the screen in your direction, and then remove the software from
the laptop. Locate the inverter board at the end of the screen in addition to
find the cable running out of your inverter board to all the motherboard. Pull
off the strip of tape at the board and remove that screws holding it in
place if there are any within your particular model of laptop or pc. Disconnect
the cable in the motherboard.
6. Connect typically the motherboard cable for cheap bezel and place any bezel
back onto this laptop case. Finally, just put the battery to the laptop
and power the item on, and then if your manufacturer抯 logo appear within the
screen, it mean that you're successfull to install the revolutionary inverter
board and cable connection rightly.

Article Tags:
Inverter Panel